Filter
Top Products
System Operations 7
Printer Setup
Agilent FrameScope 350 User’s Manual 169
Printer Setup
The FrameScope 350 can print labels directly to a Brady TLS2200 label
printer. The labeling parameters are set using the procedure “Choosing
the Labeling Format” on page 64. When the FrameScope is configured as
described in the following procedure, a label for the tested cable will be
printed after saving a test result.
To configure the FrameScope 350 to print to the Brady label printer:
1 On the Main Menu, press System. The System Settings screen
displays.
2 On the System Settings screen, press Autoprint, then Edit. The
Printer Setup screen displays.
3 Press Autoprint to enable the Autoprint function. A checkmark
shows that the function is enabled.
4 Connect the N2605A-050 interface cable to the serial ports of the
FrameScope 350 and Brady TLS2200.
5 Turn the Brady printer on.
6 Press the Func and Exit keys on the printer simultaneously. This
sets the printer to Peripheral mode.