Filter
Top Products
System Operations 7
Demo Mode
Agilent FrameScope 350 User’s Manual 175
Demo Mode
The FrameScope 350 may be put in a Demo mode for training or
demonstration purposes. In the Network tab, the Demo mode
provides for a network consisting of several stations, servers, a
router, two switch/bridges, and 5 SNMP agents. All functions
are demoable without connecting to a live network. Autotests of
all functions are simulated.
In the Cable tab, the Demo mode provides for a wiremap failure,
a cable test failure, and a cable test pass on consecutive
Autotests.
The Demo mode may be enabled and disabled by pressing Demo
Mode: on the System Settings menu from either Network or
Cable tab, then pressing Edit. When satisfied, press OK.