Filter
Top Products
Introducing the FrameScope 350 1
Getting Started
Agilent FrameScope 350 User’s Manual 11
Checking Power and Charging the Battery
The FrameScope’s battery should provide enough power for a
typical day of testing. The AC power adapter/charger can also
be used to power the unit and to recharge the battery.
To check the battery’s charge level, perform these steps:
1 Switch on the FrameScope, if necessary, by pressing the
Power button on the front of the unit.
2 Observe the battery icon in the Status display area on the
Main Menu.
The battery icon will show how much charge remains in the
battery (for example, 45%).
If the battery is severely depleted, a low-battery message will
be displayed.
3 To recharge the battery or to power the FrameScope from an
AC power source, plug the DC power connector on the
adapter/charger into the 12 Vdc connector on the side of the
unit.
4 Observe that the AC power icon is displayed in the Status
area.
The AC icon will also indicate the battery’s charge level (for
example 72%).