Ampro Corporation Littleboard 550 Personal Computer User Manual


 
LittleBoard 550 Reference Manual 1
Chapter 1 About This Manual
Purpose of this Manual
This manual is for designers of systems based on the LittleBoard™ 550 single board computer (SBC).
This manual contains information that permits designers to create an embedded system based on specific
design requirements.
Information provided in this reference manual includes:
LittleBoard 550 Specifications
Environmental requirements
Major integrated circuits (chips) and features implemented
LittleBoard 550 connector/pin numbers and definition
BIOS Setup information
Information not provided in this reference manual includes:
Detailed chip specifications
Internal component operation
Internal registers or signal operations
Bus or signal timing for industry standard busses and signals
Reference Material
The following list of reference materials may be helpful for you to complete your design successfully.
Most of this reference material is also available on the Ampro web site in the Embedded Design
Resource Center. The Embedded Design Resource Center was created for embedded system developers
to share Ampro’s knowledge, insight, and expertise gained from years of experience.
Specifications
PC/104 Spec Revision 2.5, November 2003
PC/104-Plus Spec Revision 2, November 2003
For latest revision of the PC/104 specifications, contact the PC/104 Consortium, at:
Web site: http://www.pc104.org
PCI 2.3 Compliant Specifications
For latest revision of the PCI specifications, contact the PCI Special Interest Group Office at:
Web site: http://www.pcisig.com