Filter
Top Products
User’s Guide
Features and Profiles 4-27
Menu 8: Form Thickness Control
Printer Displays Values Description
Auto Form Gap Allows the user to perform an immediate
automatic form thickness adjustment.
Thickest part of form should be used when
making this adjustment.
Quiet or Whisper High
Medium
Low
This feature determines method and impact of
a print line.
Quiet – the printer prints at full character per
second values.
Whisper – the printer prints half of the
character in the first pass and the other half
in the second pass.
The high, medium and low values are available
in specific optional configurations.
Adj. Form Gap xxx 0-198
Units
Allows the user to specify/change the form
thickness distance.
Pressing Value ▲ key causes form thickness
gap to decrease by 1 unit.
Pressing Value ▼ key causes form thickness
gap to increase by 1 unit.
Hor Gap Pos xx.x 0.0”
.
.
8.8”
Allows the user to have the printer perform
auto form gapping at any horizontal
position on the print line in tenths of an
inch.
VR Gap Pos xx.x 0.0”
.
.
Form
Length in
inches
Allows the user to have the printer perform
auto form gapping at any vertical position
on the paper.
This is in tenths of an inch and is limited by
the current form length.