AMT Datasouth 3300 Printer User Manual


 
User’s Guide
4-14 Features and Profiles
Menu 2: Forms Control (Cont’d)
Printer Displays Values Description
Manual Tear xxx FF The printer will perform a form feed before
moving to the tear position after pressing
the Tear Off key.
TOF The printer will move to the tear position after
printing crosses the next forms boundary
after pressing the Tear Off key.
No FF This value will move the paper the tear
distance only. No form feeds are
performed.
Manual Time ###s OFF The Tear Off key must be pressed to return the
forms to the print position.
1
.
.
30
The time in seconds that the form will be in the
tear position before automatically returning
to the print position.
This feature works only with the Manual Tear
key.
Auto Tear xxx OFF Values set for “Off”, the printer will not move
the form into the tear position if the form is
at top and no data is being transmitted.
IDLE Value set for “Idle”, the printer will move the
form into the tear position if the form is at
top and no data is being transmitted.
PAGE Moves the form to the tear bar position on
every page break while on line. The form
will retract after the time specified by the
“Auto Time X” feature has expired.