Filter
Top Products
User’s Guide
Forms Handling 3-25
3.10 Paper Out Condition
When the printer runs out of paper, the following messages will appear in the display
depending on paper path selected:
or
1. Remove last printed form from paper path by using Form Feed key.
2. Load continuous forms. Refer to Page 3-3.
3. Press the On/Off Line key to go back on line.
The alternating display indicates which path (Main, Alt) is empty and which form to reload.
<Paper Out: Main>
<LOAD CHECKS>
<Paper Out: Alt>
<LOAD PROFILE 2>
NOTE
If the Profile has not been renamed to match
the form being used, the display will indicate
‘Load Profile x’ as shown in the example
above. In this case, the form associated with
Profile 2 should be loaded. For more
information on naming Profiles, see the
‘Rename’ feature located in the Profile
Control menu described in Chapter 4.