Filter
Top Products
User’s Guide
4-8 Features and Profiles
4.6 Changing Features in a Profile
Feature settings in a profile may be changed through the keypad by following the steps
below:
1. Press the On/Off Line key to take the printer off line.
2. Press Park key to park paper.
3. Press the Profile key to select profile being changed.
4. Open the Keypad Door.
5. Press the Next Menu key, as necessary, to scroll through the feature menus until you
reach the menu containing the feature you wish to change.
6. Press the Feature ▲ or the Feature ▼ key to scroll the display up or down until you
reach the feature to be changed.
7. Press the Value ▲ key or the Value ▼ key to scroll the display backward or forward
until you reach the value you wish to set.
Figure 4-2: Changing Features in a Profile
8. Press the Enter key to record the new value.