Filter
Top Products
User’s Guide
Forms Handling 2-5
Pressing this key moves the form downward 1/144 inch for precise form
alignment. When the key is pressed for more than ½ second, the paper
reverse feeds continuously until the key is released.
Pressing this key advances forms up to the tear bar so that the last printed
form can easily be removed. Pressing the key a second time moves the form
back into print position.
To change the tear off position, press the Tear Off key, press Adjust ▲ or ▼,
and press the Tear Off key again. The new distance will be automatically
saved in the current profile.
Pressing this key once advances the paper by one line. When the key is
pressed for more than ½ second, continuous line feeds are performed until the
key is released.
This key allows you to select one of four user-defined profiles. To use this
key, place the printer off line; then press the Profile key. Available profile
names will be shown in the display window each time the Profile key is
pressed. This key can be used only when the printer is off line. For more
information about profiles see Chapter 4.
After changing profiles, the user should park and reload the paper to reset
top-of-form. The printer will automatically change paper paths or request a
form to be loaded depending on the Path feature setting. See Section 3.12 for
details on selecting paper paths using the Profile key.