Filter
Top Products
User’s Guide
1-24 Keypad Configuration
1.10 RS-232 and RS-422 Serial Interface Configuration
1. Set the power switch to On.
2. Open the Keypad Door. The first menu will appear on the display.
3. Press the Next Menu key until you have accessed Menu 5
4. Press the Feature ▲ Key one time to select Baud Rate Feature.
5. Press the Value ▲ or Value ▼ to change baud rate to match host computer.
6. Press the Enter Key to save your selection.
7. Press the Feature ▼ key to select Serial RS-232.
8. Press the Value ▲ ▼ keys to select the desired serial mode [RS-232, RS-422, NONE].
Select NONE to disable the serial port.
9. Press the Enter key to save your selection.
10. Use the Feature ▼, Value ▲ ▼, and Enter keys to change any other required features
in this menu.
• Parity
• Data Bits
• DTR
• HANDSHK
• X-ON CTRL ROBUST
• X-OFF CTRL ROBUST
• MODEM CTRL
M1 PAGE FORMAT
M5 SERIAL CNTRL