AMT Datasouth 3300 Printer User Manual


 
User’s Guide
G-2 Escape Sequence Quick Reference
Epson FX (Cont’d)
ASCII
Command
Epson FX
Command Description
ESC ! Master Print mode selection
ESC # Cancel Most Significant Bit (MSB) function.
ESC % Select character set from ROM or from RAM.
ESC & Define User-defined characters in RAM
ESC * Select Graphic mode.
ESC – Select/Cancel underlining.
ESC / Select Vertical Tab Channel.
ESC 0 Set line spacing to 1/8 inch.
ESC 1 Set line spacing to 7/72 inch.
ESC 2 Set line spacing to 1/6 inch.
ESC 3 Set line spacing to n/216 inch.
ESC 4 Select italic character set.
ESC 5 Cancel italic character set.
ESC 6 Enable upper character set (80 hex to 9F hex and FF hex).
ESC 7 Enable extended control codes (Turns off ESC 6).
ESC 8 Disable paper out detector.
ESC 9 Enable paper out detector.
ESC : Copies resident characters (ROM) to RAM.
ESC < Enable one line unidirectional printing.
ESC = Set MSB to 0 (Sets 8
th
bit low).
ESC > Set MSB to 1 (Sets 8
th
bit high).
ESC ? Reassign graphic codes.