Filter
Top Products
User’s Guide
1-20 Keypad Configuration
1.8 Printer Self Test
This test is used to verify printer operation. Before performing the printer self-test, refer to
Section 3.3 Load Forms Page 3-3 for instructions on loading paper in the printer.
To start the test:
1. Load 8-1/2" forms.
2. Open the Keypad Door.
3. Press the Feature ▲ Key once. LCD will show "RUN SELF TEST".
4. Press the Enter Key. Printer self test will start (Figure 1-10). The display will
alternate between the following:
5. The self-test may be stopped by pressing the Enter key or by closing the Keypad
Door.
CAUTION
MARGINS ARE SET FOR 8.5” PAPER.
PRINTING OFF OF FORM WILL LEAD
TO PRINTER DAMAGE.
<Diagnostics>
‘Enter’ To Stop