Filter
Top Products
Introduction
4
1200V Modero Video Touch Panels
1200V Panel Specifications (Cont.)
Rear Panel Components
(Cont.):
(Side panel location on NXD-Wall Mount panels)
Stereo Output connector: • Stereo output through a 3.5mm mini-jack (for use with external
speakers).
USB connector (2): • The two Type-A USB ports can connect up to two external keyboard or
mouse devices for use with Virtual PC applications.
Mini-USB connector: • 5-pin Mini-USB connector used for programming, firmware update, and
touch panel file transfer between the PC and the target panel.
Note: When connecting the panel to PC using a CC-USB (or compatible)
cable, be sure to power the panel On before attempting to connect the
USB cable from the PC to the mini-USB port on the panel.
Refer to Step 5: Confirm and View the current AMX USB device
connections section on page 58 for more information.
Operating / Storage
Environment:
• Operating Temperature: 10° C (50° F) to 40° C (104° F)
• Operating Humidity: 20% to 85% RH
• Storage Temperature: -20° C (-4° F) to 60° C (140° F)
• Storage Humidity: 5% to 85% RH
Included Accessories: • Installation Kit for 12" and 17" NXD panels (KA2251-01):
- 2-pin mini-Phoenix connector (41-5025)
- Four Drywall clips (62-5924-05) and #6 - sheet metal screws
- One CAT5 Suppression Ferrites (04-0014)
- Three Phillips-head screws (#4-20 x 0.250 Black)
• Installation Kit for 12" NXT panels (KA2251-03):
- 2-pin mini-Phoenix connector (41-5025)
- Three Phillips-head screws (#4-20 x 0.250 Black)
- Two CAT5 Suppression Ferrites (04-0014)
• Modero Table Top Cable (CA2250-50)
- provided with all NXT Table Top panels.
• NXA-AVB/ETHERNET Breakout Box (FG2254-10): Provides video/audio
distribution to the A/V panel over CAT5 cable (up to 200’/60.96m) and
accepts either Composite or S-Video.
- Although the 1200V is only sold as part of a KIT configuration,
the breakout box can be purchased separately.
Other AMX Equipment: • CB-TP12 (FG031-10)
- 12" metallic conduit box for Wall Mount installations.
• CC-USB (Type-A) to Mini-B 5-Wire programming cable (FG10-5965)
• MB-TP12 Universal VESA Mounting Box for NXD panels (FG031-50):
- Black metallic VESA back box (62-0031-50)
- Black plastic cover (with grommet opening) (60-0031-50)
- Strain relief grommet (45-0004-03)
- Four Phillips pan-head screws (#8-32 x 0.50 Black) (80-0146-02)
- Twelve Under-cut Phillips-head screws (#6-32 x 0.500 Black) (80-
0139)
• NXA-BASE/B (FG2255)
- Wireless base for Table Top touch panels (NXT models only).
• NXA-KLB Kensington Lock Kit for NXT panels (FG2259-10)
(optional only with NXT models)
• NXA-PCI80211G Wireless Card (FG2255-04)
- Although both panel types have the antennas pre-installed, installation
of the optional mini-PCI card is required to initiate wireless
communication.