Filter
Top Products
Touch Panel Accessories
16
1200V Modero Video Touch Panels
NXA-PCI80211G Wireless Card (FG2255-04)
The 1200V-Series and VG-Series Modero touch panels can connect to an internal NXA-PCI80211G
compatible mini-PCI Wireless Card connected to two antennas (57-2250-10). All 1200-V and VG-Series
panels come factory installed only with the two antennas used for later connection to the optional
wireless card which is field-installable.
The NXA-PCI80211G card functions using a 2.4GHz bandwidth with a maximum data transfer rate of
54Mbps. This card is compatible with IEEE 802.11 standards such as: 802.11b and 802.11g.
The NXA-80211G allows the end-user to take advantage of larger bandwidth to utilize features such as:
wireless intercom, Motion JPEG, networked video, and standard wireless Ethernet communication to
both a NetLinx controller and networked computers. Please follow your particular Wireless Access
Point’s instruction manual for the correct procedures to setup either a secured or unsecured connection.
Product Specifications
FIG. 15 NXA-PCI80211G mini-PCI Wireless Card
NXA-PCI80211G Specifications
Dimensions (HWD): • 0.02" x 2.13" x 4.66" (5.0 mm x 54.0 mm x 118.4 mm)
Weight: • 1.05 oz (30g)
Description: • Direct Sequence Spread Spectrum (DSSS)/CCK 802.11g Wireless mini-PCI
card with detachable antennas.
Features: • Contains integrated power amplifier (PA) and low-noise amplifier (LNA)
• Diversity Antenna Connectors automatically select the best available signal
• Enhanced transmit and receive chains
• Field-installable
• Increased sensitivity and multipath tolerance
• Operates from 2.300-2.500 GHz
• Operate at ISM frequency bands (2.4GHz) with 54Mbps data rate
• Pre-configured to communicate with current AMX Wireless Access Points
• Support for IEEE 802.11b and 802.11g
• Wired Equivalent Privacy (WEP) 64-bit and 128-bit data encryption
This device complies with Part 15 of the FCC rules. Subject to the following two conditions:
1. This device must not cause harmful interference and
2. This device must accept all interference, including interference that interferes with the
operation of this device.
Modifications not expressly approved by the manufacturer will void the user’s authority
to operate the equipment.
WARNING: This device has been evaluated and found to be compliant with the FCC Rules
for RF Exposure when the device is operated at a minimum separation distance from the
user and nearby persons. Operation of this device at closer distances should be avoided.
FCC Statement:
Certifications: FCCID: CWU-WN2301A, CE, EN 60950, EN 300 328,
and RSS 210