Filter
Top Products
Touch Panel Accessories
24
1200V Modero Video Touch Panels
Step 4: Close and Resecure the NXD Panel Enclosure
1.
With the components securely installed, gently place the outer housing back onto the metallic panel
casing (with the connector opening on the right-side of the panel) and align the four pan-head
Housing Screw holes along the edges of the outer housing.
2. Insert and secure the four pan-head Housing Screws into the pre-drilled holes along the edges of the
NXD unit by using a grounded Phillips-head screwdriver.
3. Reinstall the I/O connector plate by aligning all connectors to their respective locations.
4. Secure the I/O connector plate using a grounded Phillips-head screwdriver and then twist the Stereo
Output nut back into the Stereo Output jack.
FIG. 23 Location of the Compact Flash card and I/O plate on NXD
Outer Housing
Compact Flash card
I/O connector
plate
NXA-PCI80211G
wireless card
location
Four Pan-head
Housing
Screws
Use care not to bend or damage any antenna connections while replacing the outer
housing.