Filter
Top Products
AT Command Set
A-24 Issue 2 November 1996
Command: &F
Function: Load the factory-default configuration.
Type: immediate
Arguments: none
S-Register: none
Example: AT&F
Comments: The factory-default configuration values are
permanently stored in ROM and can be recalled at any
time. No reset or self-test is initiated by issuing the &F
command. The &F command does not recall the
factory-default installation options established by the
value of S-register S24.
See Also: “Configuration Parameters” on page 3-7.
Table A-1. Accepted AT Command Labels — Continued
Label Description
ENTER