Filter
Top Products
AT Command Set
A-2 Issue 2 November 1996
Arguments: Many commands accept or require a numerical
argument. Whether an argument is required and the
range of acceptable values for the argument is shown
here.
S-Register: The S-registers consist of 28 1-byte memory locations
in the data module, designated as S0 through S27. The
S-registers hold values for defining the current
configuration of the 8400B Plus Data Module. Some
commands modify a specific S-register, and some
commands perform an action based on the current
value stored in an S-register. Whether an S-register is
modified or read by the current command is explained
here.
Example: A sample command line follows this label to
demonstrate how the command may be used.
Comments: An explanation of the example and any other
information about the command not provided elsewhere
is provided here. Additional commands may be typed
on the same command line with the command currently
under discussion, unless noted otherwise.
See Also: Following this label are suggestions on where to look for
more information about the current command and a
listing of any other commands that may be used with or
affect the use of the current command.
Table A-1. Accepted AT Command Labels — Continued
Label Description