Filter
Top Products
AT Command Set
Issue 2 November 1996
A-11
Command: E
Function: Turn the command echo on or off.
Type: configuration
Arguments: No argument or an argument of 0 disables echo and an
argument of 1 enables echo. The factory-default is 1.
S-Register: Bit 1 of S14 is set according to the argument of the
command.
Example: ATE1
Comments: Typically, for a display terminal operating in full-duplex
mode, use the 1 argument if you wish to see the AT
commands on the screen as you type them. If your
display terminal is operating in half-duplex mode, use
the 0 argument (the 1 argument would cause characters
typed to appear on the screen like tthhiiss).
See Also: S-Register S14 on page C-20.
Table A-1. Accepted AT Command Labels — Continued
Label Description
ENTER