Filter
Top Products
S-Registers
C-8 Issue 2 November 1996
Register: S1
Description: The number of incoming rings detected. Incremented
each time a ring is detected. It is cleared if no rings are
detected for eight seconds.
Range of Values: The value may be 000 through 255 rings. The
factory-default setting is 000 rings.
Storable: no
Comments: In the 8400B Plus Data Module, incoming rings are not
detected as such. The PBX notifies the 8400B Plus
Data Module of an incoming call and a ring cycle (RI
lead) is generated internally. The register is
incremented after each ring cycle.
See Also: S-register S0 on page C-7.
Table C-1. Labels Used in S-Registers — Continued
Label Description