Filter
Top Products
AT Command Set
Issue 2 November 1996
A-27
Comments: 1. In the example, a local data loopback test is
initiated.
2. All argument values in the range of 0-8 are valid. All
of the options selected by the command arguments
described above are accepted and implemented by
the 8400B Plus Data Module.
3. If the local digital loopback or remote digital
loopback tests are in progress, it is necessary to
issue the escape sequence to return to command
mode before the &T0 command can be used to
terminate these tests. The test timer value stored in
S-register S18 can also be set to halt automatically
any locally initiated test in progress.
See Also: S-register S16 on page C-22, S-register S18 on page
C-24, and Appendix D for information about performing
loopback tests.
Table A-1. Accepted AT Command Labels — Continued
Label Description