Filter
Top Products
Configuration and Operation
3-12 Issue 2 November 1996
stored so that additional commands can be entered on the same
command line.
Table 3-4. Commands for Using Stored Telephone Numbers
Command Line: Action:
AT&Zm=nnn...n Store number nnn...n in location m, which is
one of four locations designated by the numbers
0 through 3. For example:
AT&Z2=918006245123
stores the number 918006245123 in number
storage location 2.
AT&Zm= Delete any number stored in location m, which is
one of four locations designated by the numbers
0 through 3. For example:
AT&Z2=
deletes any number that may have been stored
in number storage location 2.
ATDS=m Dial the number stored in location m, which is
one of four locations designed by the numbers 0
through 3. For example:
ATDS=2
causes the 8400B Plus Data Module to dial the
number stored in location 2.
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER