Filter
Top Products
Installation
2-4 Issue 2 November 1996
What You Need
To install and operate the 8400B Plus Data Module, you will need the following
items:
■ an asynchronous data terminal or PC with a terminal emulation program
and EIA cord
■ (optional) a two-wire DCP voice terminal with D8W cord
Figure 2-2 illustrates a standard US Configuration, using a telephone and
separate power supply.
Figure 2-3 illustrates a standard International Configuration, using a telephone
and separate power supply.
The US Configuration may be installed using the Lucent Technologies 1145A or
Lucent Technologies 1145B1 closet power supply. The International
Configuration may be installed using the Lucent Technologies 1145B1 closet
power supply. Both configurations are shown in Figure 2-4. This type of
installation eliminates the need for the separate power supply.