Filter
Top Products
S-Registers
Issue 2 November 1996
C-17
Register: S10
Description: The value in this S-register determines how long the
8400B Plus Data Module will wait after loss of line
signal is detected before disconnecting.
Range of Values: Value may be 000 through 255 tenths of a second;
factory-default is 14 tenths of a second (1.4 seconds).
Storable: no
Comments: The delay set by this S-register allows the receive line
signal to disappear momentarily without causing a
disconnect (hang up). Setting this S-register to the
maximum value (255) causes the Data Module to
ignore receive line signal status and not disconnect the
data call if line signal is lost.
See Also: none
Table C-1. Labels Used in S-Registers — Continued
Label Description