Filter
Top Products
S-Registers
Issue 2 November 1996
C-23
Comments: 1. Only one of the tests may be in progress at any
time. The T0 command terminates any locally
initiated test in progress and sets S-register S16 to
00.
2. Refer to the explanation of hexadecimal values
under the “Range of Values” heading on page C-4.
See Also: The &T command on page A-26 and Appendix D for
information about performing loopback tests.
Register: S17 — not used.
Table C-1. Labels Used in S-Registers — Continued
Label Description