Filter
Top Products
Dial Modifiers
B-4 Issue 2 November 1996
Dial Modifier: S=n
Function: Dial the number stored in location n, where n has a
value 0-3.
S-Register: none
Example: ATDS=0
Comments: The S=n dial modifier allows the 8400B Plus Data
Module to dial a number previously stored with the &Zn
command. In the above example, the number stored in
location 0 is dialed. The S=n dial modifier can also be
used for voice calls.
See Also: "Voice Operations" on page 3-18 and the &Z command
on page A-31.
Table B-1. Dial Modifiers — Continued
Label Description
ENTER