Filter
Top Products
108
SERIES II INTELLIGENT DATA/FAX MODEMS
Table 7-2. Callback Password and Dial Back Phone Number Entry
Procedures
Step
Procedure
1. Enter your modem's LOGIN Password (as selected in Table 7-1)
by entering the following:
AT#Ixxxxxxxxxx<CR> (xxxxxxxxxx from Table 7-1)
Enter your modem's Setup Password (as selected in Table 7-1)
by entering the following:
AT#Syyyyyyyyyy<CR>(yyyyyyyyyy from Table 7-1)
2. Enable the Callback Security feature by entering the following:
AT#DB2<CR>ÊorÊAT#DB1<CR>
The following message is displayed on your monitor:
Entering Callback Mode, current phone numbers will be erased. Do you
want to continue? (Y/N)
3. Enter a Y or N and hit RETURN.
Note: If this is your first time into Callback Mode, we recommend
answering Y to clear all previous Callback Passwords and phone
numbers from memory.
4. Enter individual Callback Passwords for each of 30 different phone
number memory locations as follows:
AT#CBN0xxxxxxxxxx<CR>
To enter Callback Password for the first location (a minimum 6
characters, up to a maximum of 10 characters must be used).
AT#CBN1xxxxxxxxxx<CR>
To enter Callback Password for the second location...etc (a
minimum 6 characters, up to a maximum of 10 characters must
be used).
Note: The first character of your first Callback Password must
be non-numeric.
5. Enter individual phone numbers for each of the 30 memory
locations as follows:
AT+ - DP...????N0 <CR> (number for location N0)