Filter
Top Products
158
SERIES II INTELLIGENT DATA/FAX MODEMS
Command Values Description
Sr=n r = 0-11, 13, Sets value of Register “r” to value of “n”,
15-19, 24-26, where “n” is entered in Decimal format.
29, 30, 32, 34...
Sr? r = 0-11, 13, Reads value of Register “r” and displays
15-19, 24-26, value in 3-digit Decimal format.
30, 32 or 34...
$SBn n = speed $SB300 selects 300 bps at serial port.
$SB1200 selects 1200 bps at serial port.
$SB2400 selects 2400 bps at serial port.
$SB4800 selects 4800 bps at serial port.
$SB9600 selects 9600 bps at serial port.
$SB19200 selects 19,200 bps at serial port.
$SB38400 selects 38,400 bps at serial port.
$SB57600 selects 57600 bps at serial port.
*$SB115200 selects 115200 bps at serial
port.
&SFn n = 0 or 1 *&SF0 selects DSR follows CD.
&SF1 selects DSR independent.
&Sn n = 0, 1 or 2 &S0 forces Data Set Ready On.
*&S1 lets Data Set Ready act normally.
&S2 Data Set Ready drop is regulated by
S24 on disconnect.
$SPn n = 0 or 1 *$SP0 disables UUCP Spoofing
$SP1 enables UUCP Spoofing
* Factory Default Setting