Filter
Top Products
49
CHAPTER 5: Command Mode
$EB 336 (MD1641A) only: 10/11-Bit
Asynchronous Format
#P Parity Selection
CONFIGURE DATA &E14 Data Compression Disabled
COMPRESSION &E15 Data Compression Enabled
CONFIGURE SPEED $BA0 Speed Conversion On
CONVERSION $BA1 Speed Conversion Off
$MB Set modem speed (e.g., $MB33600)
$SB Set serial port speed
(e.g., $SB115200)
EXECUTE $H Help
IMMEDIATE I Product Code Inquiry
ACTION I 9 Windows 95 Autodetect Inquiry
COMMANDS L5 List Current Operating Parameters
L6 List S-Register Values
L7 List additional Configuration
Parameters
L8 List On-Line Diagnostics
H Off Hook
+++AT<CR>
Escape Sequence: Entering
Command Mode while On-Line
%E Escape Sequence Options...Entering
Command Mode while On-Line
A Force Answer Mode
O Exit Command Mode/Go Back On-
Line
EXECUTE %DF Format Line Probe Display (Graph or
LINE Table Format)
PROBE %DP Enable/Disable Reading Line Probe
COMMANDS L9 Display of Signal Strength
Information
L10 Display Signal to Noise Ratio (SNR)
L11 Display of Noise Information
&RP Initiates Retrain to Read Line Probe
Parameters