Filter
Top Products
156
SERIES II INTELLIGENT DATA/FAX MODEMS
#Ln n = 0 thru 3 *#L0 means modems negotiate V.42 Mode.
#L1 means MNP on and LAP-M off.
#L2 means LAP-M on and MNP off.
#L3 means no detection phase but go
directly to LAP-M.
* Factory Default Setting
Command
Values Description
Mn n = 0 thru 3 M0 means Monitor speaker always Off.
*M1 means Monitor speaker On until
carrier detected
M2 means Monitor speaker always On.
M3 Monitor speaker on during dialing/off
during handshaking.
$MBn n = speed $MB300 selects 300 bps on-line.
$MB1200 selects 1200 bps on-line.
$MB2400 selects 2400 bps on-line.
$MB4800 selects 4800 bps on-line.
$MB9600 selects 9600 bps on-line.
$MB14400 selects 14400 bps on-line
$MB19200 selects 19200 bps on-line
$MB28800 selects 28800 bps on-line
*$MB33600 selects 33600 bps on-line
&Mn n = 0 or 1 *&M0 selects Async when on-line.
&M1 selects Sync when on-line.
Nd d = 0 thru 9 Dial stored telephone number “d” (Do not
include the letter D in this command.)
NdNe d = 0 thru 9 Number Linking. If first number dialed
(“d”)
e = any other is busy, another stored number (“e”) may
number 0 be automatically dialed.
thru 9
O Exit Command Mode and go into On-Line
Mode.