Filter
Top Products
94
SERIES II INTELLIGENT DATA/FAX MODEMS
S5
Backspace Character
Unit: Decimal equivalents of ASCII characters
Range: 0-127
Default: 8 (^H)
Description: S5 defines the character recognized as
BACKSPACE. S5 may be set for any ASCII
character.
S6
Wait Time for Dial Tone
Unit: Seconds
Range: 2-255
Default: 2
Description: S6 sets the time the modem waits after the
RETURN key is pressed before executing a dial
command. The default setting is two seconds.
S7
Time for Carrier (Abort Timer)
Unit: Seconds
Range: 1-255
Default: 45
Description: S7 defines the Abort Timer (lack of carrier)
delay time. The default value is 45 seconds. This
means that, after dialing, the modem waits for a
carrier signal for up to 45 seconds and, if none is
detected, aborts the call. The maximum S7 value
is 255.
S8
Pause Time for Comma
Unit: Seconds
Range: 0-255
Default: 2
Description: S8 sets the length of the pause caused by a
comma inserted in a dialing command. The