Black Box MD1640A Modem User Manual


 
50
SERIES II INTELLIGENT DATA/FAX MODEMS
READ AND Sr? Read Current S-Register Value
ASSIGN Sr= Assign S-Register Value
S-REGISTER
VALUES
REMOTE #CBN Passwords for Callback Phone #s
CONFIGURATION #DB Callback Security Enable/Disable
& CALLBACK #I Change LOGIN Password
SECURITY #RCBNxx
Erase Password Linked with
Memory Location xx
#S Change SETUP Password
TEST MODEM U Self-Test Modem (Chapter 8)
&T Enable/Disable Digital Loopback
Signal
5.3 Result Codes
The Series II Modem Command mode provides you with several re-
sponses, or “Result Codes”, that can aid you in Command mode
operation. These Result Codes are displayed on your video monitor.
You can choose result codes that closely match those of the standard AT
command set, or choose enhanced function result codes that have been
used in Series II Modems (“Series II" responses). The &Q command
selects which result codes will be used.
You can choose to have these Result Codes displayed in either “verbose”
(full words) or “terse” (digits) format. This is controlled by the ATV0
(terse) or ATV1 (verbose) commands. The Series II Modem defaults to
verbose format.
AT&Q0 selects Series II responses with Reliable/LAPM/Compression
modifiers. The terse response code for CONNECT 2400 is 9. AT&Q1
selects Standard AT command set responses. The terse result code for
CONNECT 2400 is 10.