Filter
Top Products
80
SERIES II INTELLIGENT DATA/FAX MODEMS
Asynchronous Word Length Selection $EB (336 Only)
The Series II Modem 336 (MD1641A) has an 11-bit capacity when
operating asynchronously. The $EB command selects between 11-bit
and 10-bit operation. AT$EB1 enables 11-bit format (1 start bit, 8 data
bits, 1 parity bit, and 1 stop bit). AT$EB0 (default) enables 10-bit
format (1 start bit, 7 data bits, 1 parity bit, and 1 stop bit). $EB is
functional in both command and on-line mode. $EB0 automatically
detects parity when any AT command is issued.
AT$EB0 = Use 10-bit words
AT$EB1 = Use 11-bit words
The factory default setting is AT$EB0.
Parity Selection #P
The #P command enables the setting of parity. AT#P0 selects no parity.
AT#P1 selects odd parity. AT#P2 selects even parity and is the default
value. Note when setting up your data comm software, it is critical that
both your remote and local system's parity selection be set identically.
AT#P0 = no parity
AT#P1 = odd parity
AT#P2 = even parity
The factory default setting is AT#P2.