Filter
Top Products
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
4-26
(22) Press the two catches holding the idle gear 13 to the frame and then remove the idle gear
13. Slide the first eject roller to the left until the slot in the roller shaft aligns with the slot in
the frame and then remove the roller by pulling it forwards.
Fig. 4-47
(23) Remove the eight eject pinch rollers and pinch springs by lifting them upwards until the
springs release from the frame.
Fig. 4-48
Fixing unit frame
Idle gear 13
First eject roller
Fixing unit frame
Pinch spring
Eject pinch roller