Filter
Top Products
Network Scanning (For models with built-in network support)
124
4
Factory reset 4
You can reset Quality, File Type, Glass Scan Size and File Name to the factory settings.
a Press the (Scan) key.
b Press Scan to FTP.
c Press a or b to choose <Manual>.
Note
If there is no FTP Profile configured, skip c and go to d.
d Press to choose Name for the FTP host address or IP Address for the FTP IP address.
e Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
f Enter the destination folder (for example /brother/abc/, up to 60 characters).
Press OK.
g Enter the username.
Press OK.
h Enter the password.
Press OK.
i Press d or c to choose Factory Reset.
j Press Yes.
k Press Stop/Exit.