Filter
Top Products
Brother PC-FAX Software (MFC models only)
144
6
Enabling the PC-FAX Receiving software on your machine 6
You can optionally enable the Backup Print option. When enabled, the machine will print a copy of the fax
before the fax is sent to the PC or the PC is switched off.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose Setup Receive.
Press OK.
d Press a or b to choose Memory Receive.
Press OK.
e Press a or b to choose PC Fax Receive.
Press OK.
f Press a or b to choose <USB> or your PC name if connected on a network.
Press OK.
g Press a or b to choose Backup Print:On or Bac kup Print:Off.
Press OK.
h Press Stop/Exit.
For Touchscreen models
6
a Press MENU.
b Press a or b to choose Fax.
c Press a or b to choose Setup Receive.
d Press a or b to choose Memory Receive.
e Press a or b to choose PC Fax Receive.
f Press a or b to choose <USB> or your PC name if connected on a network.
g Press to choose Backup Prin t:On or Backup Print:Off.
Press OK.
h Press Stop/Exit.
Note
If you select Backup Print:On, the machine will print the fax, so you will have a copy if there is a power
failure before it is sent to the PC. The fax messages are automatically erased from your machine’s memory
when they have been successfully printed and sent to your PC. When Backup Print is off, your fax
messages are automatically erased from your machine’s memory when they have been successfully sent
to your PC.