Filter
Top Products
Basic Printing
13
z When paper is curled, gently bend it in the opposite direction of the
curl (without curling the reverse side) and then load the paper. For
details on how to flatten paper curl, refer to “Media is curled” on page
68.
z To prevent paper from being curled, we recommend handling it in the
following ways:
- Put unused paper back into the package, and store them
horizontally.
- Remove only as many sheets from the package as you need right
before printing.
z For details on how to load the paper, refer to the appropriate section in
“Printing Media” in the
User’s Guide
.
5 Prepare to start printing.
Printing preparations are complete. Start printing.
z The following paper can be used in the Front Tray.
Paper Size
Standard paper: From 4" x 6" / 101.6 x 152.4 mm to 14" x 17" / 355.6
x 431.8 mm
Non-standard paper: From 100.0 x 148.0 mm / 3.94 x 5.83 inches to
355.6 x 584.2 mm / 14 x 23 inches
Thickness
From 0.1 mm / 4 mil to 1.2 mm / 47 mil
Do not use paper thicker than this, as it could jam in the printer.
To Print Continuously
z To print from the Front Tray again, return to (3) in step 3 and load paper
in the Front Tray. Then start printing.
(1) Press the FRONT
FEED button.
The paper feeds
into the printer
automatically
and the FRONT
FEED button
flashes slowly.