Filter
Top Products
A-43
Cisco TelePresence System Release 1.4 Administrator’s Guide
OL-12586-02
Appendix A Command Line Interface (CLI) Commands
show network failover
show network failover
show network failover
Syntax Description None
Command Modes Admin
Command History
Usage Guidelines Use this command to display NIC Teaming network fault tolerance information.
Examples
admin:show network failover
Network Fault Tolerance is not configured.
Related Commands
Release Modification
1.1 This command was first documented.
Command Description
show network all Displays all show network command information
show network eth0 Displays basic Ethernet 0 platform network information
show network
ip_conntrack
Retrieves the current utilization of ip_conntrack
show network
max_ip_conntrack
Retrieves the current ip_conntrack_max information
show network route Displays basic network route information
show network status Displays basic network status information