Filter
Top Products
8-79
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 8 Interoperability with Legacy Video Conferencing Devices
Configuring Cisco TelePresence Interoperability
Configuring Cisco TelePresence Interoperability
To configure Cisco TelePresence Interoperability, you must complete the following configuration tasks:
• Configure Unified CM to support Cisco TelePresence Interoperability
• Configure CUVC to support Cisco TelePresence Interoperability
• Add at least one static meeting to CTMS with interoperability enabled
Configuring Unified CM for Cisco TelePresence Interoperability
To configure Unified CM for Cisco TelePresence Interoperability, you must create a SIP trunk security
profile and a SIP trunk using the same configuration parameters as you would in defining a SIP trunk for
CTMS. Then you must add a new route pattern in Unified CM that points to the CUVC. CTMS dials the
CUVC using the number defined in the “CUVC number” field of the CTMS meeting definition when the
first CTS participant joins the meeting.
Creating a SIP Trunk Security Profile
To create a SIP trunk security profile:
Step 1 Click System. Under Security Profile, click SIP Trunk Security Profile.
Step 2 Click the Add New button at the bottom of the page or click the + sign at the top of the page.
Step 3 Enter the settings as indicated in Table 8-1 to configure the SIP trunk security profile. Leave default
settings for fields not included in Table 8-1.
.
Step 4 Click the Save button at the bottom of the page.
Note Use the same SIP Trunk Security Profile settings for the CTMS SIP trunk and the CUVC SIP trunk.
Table 8-1 SIP Trunk Security Profile Settings
Field Required Setting
Name Yes Enter a text string identifying this SIP trunk
security profile.
Description — Enter a text string describing this SIP trunk
security profile.
Device Security Mode Yes Select Non Secure.
Incoming Transport Type Yes Select TCP+UDP.
Outgoing Transport Type Yes Select TCP.
Incoming Port Yes Enter 5060.