Filter
Top Products
4-39
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 4 Configuring CTMS Administration Software
Configuring and Editing Access Management
• To register new or modified settings, click Apply.
• To close this window without applying settings, click Close.
Step 5 To edit an existing user profile, click the radio button to the left of the table entry to select the user, and
then click Edit. When you click Edit from the Access Management screen, CTMS Administration
software takes you to the Edit User Settings table. Enter settings (as needed) as described in Table 4-11
• To register new settings, click Save.
• To close this window without applying settings, click Close.
Verify Password Re-enter the password defined for this user.
Role Defines a specific user role. In CTMS Administration software, there
are three possible roles, each with specific levels of administrative
access:
• Administrator: Administrators have access to all screens and
configuration tasks in CTMS Administration software.
• Conference Scheduler: Conference-Schedulers have access only
to the Meeting Management screens and associated
configuration tasks in CTMS Administration software.
• Diagnostic Technician: Diagnostic Technicians have access only
to Monitoring and Troubleshooting screens and one task (system
restart) in CTMS Administration software.
Note A single user can have more than one role.
Click the appropriate radio button to select.
Table 4-10 New User Settings
Field or Button Setting
Table 4-11 Edit User Settings
Field or Button Setting
User (View only.) Defined role.
Password Password for the username indicated in the Username field.
Note Passwords must be at least 5 characters, but not more than 64
characters in length, and can contain upper and lower case
alphanumeric characters and the underscore and dash
characters. The following usernames are not allowed:
apache, daemon, nobody, operator, and shutdown.
Verify New Password Re-enter the password defined for this user.