Cisco Systems MCS 7800 Series Switch User Manual


 
5-51
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 5 Managing Meetings
Ad Hoc Meetings
To register new or modified settings, click Apply.
To restore the original settings, click Reset.
Creating and Editing Meeting Templates
The Meeting Template setting screen initially displays a table providing the following information about
already defined meeting templates. Figure 5-5 shows the Meeting Templates screen.
Switching Policy Defines how CTMS calls are displayed during a meeting. CTMS
displays active speakers on screen. There are two active speaker
display options:
Segment: (Speaker) With segment switching, each individual
table segment (defined as a display and a camera) is displayed
on the screen as that segment becomes the active speaker.
Site: (Room) When you select “site,” all table segments for a
particular room are displayed on screen when any segment in
that room is the active speaker.
Click the appropriate radio button to select.
Note If you are running CTS 1.3 or later, you can control how
Cisco TelePresence calls are displayed from the Cisco
TelePresence phone interface. Press the Speaker softkey to
display the active segment; press the Room softkey to
display all segements from a particular site.
Video Announce When selected, if a new attendee joins the meeting, the attendee is
displayed on-screen for 2 seconds. Options are Yes and No. Click
the appropriate radio button to select.
Quality (per Display) This field sets the system bandwidth and screen resolution. A higher
bandwidth increases video quality, but may also cause packets to be
dropped and video to be interrupted. Choices:
Highest Detail, Best Motion: 4Mbps 1080p
Highest Detail, Better Motion: 3.5Mbps, 1080p
Highest Detail, Good Motion: 3Mbps, 1080p
High Detail, Best Motion: 3Mbps, 720p
High Detail, Better Motion: 2Mbps, 720p
High Detail, Good Motion: 1Mbps, 720p
Default is Highest Detail, Best Motion: 4Mbps 1080p.
Table 5-4 New Ad Hoc Meetings Settings
Field Description