Cisco Systems MCS 7800 Series Switch User Manual


 
2-14
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 2 Configuring Cisco Unified Communications Manager for CTMS
Prerequisites
Prerequisites
Before starting the tasks in this chapter, make sure that the following conditions are met or that you
understand the following information:
Unified CM is running and using version 6.0 or later software.
Cisco TelePresence System is running version 1.2.3 or later software. For interoperability with
legacy video conferencing devices, Cisco TelePresence System must be running version 1.3 or later
software.
For additional information about configuring Unified CM for Cisco TelePresence System, refer to the
Cisco Unified Communications Manager Installation Guide for the Cisco TelePresence System.
Logging into the Unified CM Administration Application
To log into the Unified CM Administration application:
Step 1 Open a web browser.
Step 2 Access a web browser that is supported by the Unified CM Administration application from any user PC
in your network. In the address bar of the web browser, enter the following URL:
https://
CUCM-server-name
where CUCM-server-name is the name or IP address of the server.
Note You may need to specify the address of the server where Unified CM is installed. If your network
uses DNS services, you can specify the hostname of the server. If your network does not use
DNS services, you must specify the IP address of the server.
Step 3 Log in with your assigned administrative privileges.
Step 4 Select Cisco Unified Communications Manager Administration in the Navigation field at the upper
right corner of the page and click Go to return to the Cisco Unified Communications Manager
Administration home page.
Creating a SIP Trunk Security Profile
To create a SIP trunk security profile:
Step 1 Click System. Under Security Profile, click SIP Trunk Security Profile.
Step 2 Click the Add New button at the bottom of the page or click the + sign at the top of the page.