Filter
Top Products
5-58
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 5 Managing Meetings
Viewing and Editing Active Meetings
• To register new or modified settings, click Save.
• To exit and return to the Active Meetings list, click Close.
VIP Source Defines how the VIP is displayed to all endpoints. Options are:
Room: If selected, all segments for the CTS endpoint identified as
“VIP” are displayed.
Center Segment: If selected (and the CTS endpoint identified as
“VIP” is a CTS-3000), then only the center segment is displayed.
Click the appropriate radio button to select.
<Meeting Attendees> Defines roles for participates if VIP mode is selected. Options are:
VIP: This attendee is broadcast to all other meeting attendees for
the entire meeting. The VIP’s endpoint continues to switch between
endpoints with active speakers. Only one VIP can be defined per
meeting.
Viewer: The VIP is broadcast to this attendee.
NA: The attendee is neither a viewer or a VIP. The NA’s endpoint
continues to switch between end points with active speakers.
Click the appropriate radio button to select.
Table 5-8 Active Meetings Settings
Field Description