Filter
Top Products
5-44
Cisco TelePresence Multipoint Switch Release 1.1 Administration Guide
OL-12586-02
Chapter 5 Managing Meetings
Defining and Editing Default Settings
Figure 5-1 Default Settings
To define default settings:
Step 1 Click Default Settings under the Meetings Management folder in the Navigation Pane.
Step 2 Default Settings displays a table providing the following configuration fields:
Table 5-1 Default Settings
Field or Button Setting
Switching Policy Defines how CTMS calls are displayed during a meeting. CTMS displays
active speakers on screen. There are two active speaker display options:
• Segment: With segment switching, each individual table segment
(defined as a display and a camera) is displayed on the screen as that
segment becomes the active speaker.
• Site: When you select “site,” all table segments for a particular room
are displayed on screen when any segment in that room is the active
speaker.
Click the appropriate radio button to select.
Maximum Rooms Defines the maximum number of Cisco TelePresence rooms allowed to
dial into in a static multi-point meeting. The range is from 1 to 48.
Video announce If this option is selected, when a new attendee joins the meeting, the new
attendee is displayed for 2 seconds. Options are Yes and No. Click the
appropriate radio button to select.