Filter
Top Products
Managing Your Device
Configuring Log and E-mail Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 126
8
STEP 6 Click Save.
To edit an entry in the Logging Setting Table, select the entry and click Edit. Make
your changes, then click Save.
Remote Log Server Enter the IP address of the log server that will
maintain logs.
Log Severity for Local
Log and Email
Choose the severity of events for which you want
to maintain logs and send logs them to a specific
email address. All log types that are higher in
severity than the selected log type are
automatically included and you cannot exclude
them. For example, if you choose Error logs,
Emergency, Alert, and Critical are also selected.
The event severity levels are listed from the
highest severity to the lowest severity:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning
properly, but a system notice occurred.
• Information—Device information.
• Debugging—Detailed event information.
Choosing this severity of logs generates a
long list of logs and is not recommended
during normal router operation.
Enable To enable these logging settings, check this box.