Filter
Top Products
Configuring the Firewall
Managing Firewall Schedules
Cisco RV130/130W Wireless Multifunction VPN Router Administration Guide 87
5
Configuring Universal Plug and Play
Universal Plug and Play (UPnP) allows automatic discovery of devices that can
communicate with the device.
To configure UPnP, configure these settings on the Basic Settings page:
Managing Firewall Schedules
You can create firewall schedules to apply firewall rules on specific days or at
specific times of the day.
Adding or Editing a Firewall Schedule
To create or edit a schedule:
STEP 1 Choose Firewall > Schedule Management.
STEP 2 Click Add Row.
STEP 3 In the Name field, enter a unique name to identify the schedule. This name is
available on the Firewall Rule Configuration page in the Select Schedule list. (See
Configuring Access Rules.)
STEP 4 In the Scheduled Days section, choose if you want to apply the schedule to All
days or Specific Days. If you choose Specific Days, check the box next to the
days that you want to include in the schedule.
STEP 5 In the Scheduled Time of Day section, choose the time when you want the
schedule to apply. If you choose Specific Time, enter the start and end times.
STEP 6 Click Save.
UPnP Check Enable to enable UPnP.
Allow Users to Configure Check this box to allow UPnP port-mapping rules
to be set by users who have UPnP support enabled
on their computers or other UPnP-enabled devices.
If disabled, the device does not allow the
application to add the forwarding rule.
Allow Users to Disable
Internet Access
Check this box to allow users to disable Internet
access.