Filter
Top Products
Configuring Networking
Configuring the IP Mode
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 43
3
Configuring the IP Mode
Wide area network configuration properties are configurable for both IPv4 and
IPv6 networks. You can enter information about your Internet connection type and
other parameters in these pages.
To select an IP mode:
STEP 1 Choose Networking > IP Mode.
STEP 2 From the IP Mode drop-down menu, choose one of the following options:
STEP 3 (Optional) If you are using 6to4 tunneling, which allows IPv6 packets to be
transmitted over an IPv4 network, do the following:
a. Click Show Static 6to4 DNS Entry.
b. In the Domain and IP fields, enter up to five domain-to-IP mappings.
The 6to4 tunneling feature is typically used when a site or end user wants to
connect to the IPv6 Internet using the existing IPv4 network.
STEP 4 Click Save.
LAN:IPv4, WAN:IPv4 To use IPv4 on the LAN and WAN ports.
LAN:IPv6, WAN:IPv4 To use IPv6 on the LAN ports and IPv4 on the WAN
ports.
LAN:IPv6, WAN:IPv6 To use IPv6 on the LAN and WAN ports.
LAN:IPv4+IPv6,
WAN:IPv4
To use IPv4 and IPv6 on the LAN ports and IPv4 on
the WAN ports.
LAN:IPv4+IPV6,
WAN:IPv4+IPv6
To use IPv4 and IPv6 on both the LAN and WAN
ports.
LAN:IPv4, WAN:IPv6 To use IPv4 on the LAN and IPv6 on the WAN ports.