Filter
Top Products
Configuring Wireless Networks
Configuring Basic Wireless Settings
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 64
4
STEP 4 Click Save.
Configuring the Security Mode
You can configure one of the following security modes for wireless networks:
Configuring WEP
The WEP security mode offers weak security with a basic encryption method that
is not as secure as WPA. WEP may be required if your network devices do not
support WPA.
NOTE If you do not have to use WEP, we recommend that you use WPA2. If you are using
the Wireless-N only mode, you must use WPA2.
Enable SSID Click On to enable the network.
SSID Name Enter the name of the network.
SSID Broadcast Check this box to enable SSID broadcast. If
SSID broadcast is enabled, the wireless router
advertises its availability to wireless-equipped
devices in the range of the router.
Security Mode See Configuring the Security Mode.
MAC Filter See Configuring MAC Filtering.
VLAN Choose the VLAN associated with the network.
Wireless Isolation with SSID Check this box to enable wireless isolation
within the SSID.
WMM (Wi-Fi Multimedia) Check this box to enable WMM.
Max Associated Clients The maximum number of clients that can
connect to the selected wireless network. Enter
a number between 1 and 64.
WPS Check this box to map the device WPS button
on the front panel to this network.
Portal Profile See Configuring Captive Portal.