Filter
Top Products
Chapter 2 Introduction to the SCE Platform
Back Panel
Cisco SCE 1000 2xGBE Installation and Configuration Guide
2-4 OL-7821-05
LED Groups Description
Mng The Mng port LEDs indicate the operational status of the SCE 1000 out-of-band
LAN-based management port, as follows:
• Link/Active
Green — indicates that the port link is up
Unlit — indicates that the port link is down
• 10/100/1000
Green — indicates that the port is set to 100 Mbps
Unlit — indicates that the port is set to 10 Mbps
Orange — indicates that the port is set to 1000 Mbps
Back Panel
The SCE 1000 platform back-panel contains the following components:
• Two field-replaceable power supply units with ON/OFF switches
• One field-replaceable fan drawer
• Ground connections
• One connector to the external bypass module
The rear panels of both the AC- and DC-powered SCE 1000 platforms are shown in the following
pair of figures.
Figure
2-2: SCE Platform Back Panel: AC Power
Figure
2-3: SCE Platform Back Panel: DC power