Filter
Top Products
1–2
Generic Two-Node Cluster with Minimum Disk Configuration
and Quorum Disk .....................................................
1–7
1–3
Minimum Two-Node Cluster with UltraSCSI BA356 Storage
Unit .....................................................................
1–9
1–4
Two-Node Cluster with Two UltraSCSI DS-BA356 Storage
Units ....................................................................
1–11
1–5
Two-Node Configurations with UltraSCSI BA356 Storage
Units and Dual SCSI Buses ......................................... 1–13
1–6
Cluster Configuration with HSZ70 Controllers in Transparent
Failover Mode .........................................................
1–14
1–7
NSPOF Cluster using HSZ70s in Multiple-Bus Failover Mode 1–16
1–8
NSPOF Fibre Channel Cluster using HSG80s in Multiple-Bus
Failover Mode .........................................................
1–17
3–1
VHDCI Trilink Connector (H8861-AA) ............................ 3–8
3–2
DS-DWZZH-03 Front View .......................................... 3–10
3–3
DS-DWZZH-05 Rear View ........................................... 3–14
3–4
DS-DWZZH-05 Front View .......................................... 3–15
3–5
Shared SCSI Bus with HSZ70 Configured for Transparent
Failover .................................................................
3–20
3–6
Shared SCSI Bus with HSZ80 Configured for Transparent
Failover .................................................................
3–21
3–7
TruCluster Server Configuration with HSZ70 in Multiple-Bus
Failover Mode .........................................................
3–24
3–8
TruCluster Server Configuration with HSZ80 in Multiple-Bus
Failover Mode .........................................................
3–25
4–1
KZPBA-CB Termination Resistors ................................. 4–18
5–1
Connecting Memory Channel Adapters to Hubs ................. 5–9
6–1
Point-to-Point Topology .............................................. 6–6
6–2
Fabric Topology ........................................................ 6–7
6–3
Arbitrated Loop Topology ............................................ 6–8
6–4
Fibre Channel Single Switch Transparent Failover
Configuration ......................................................... 6–9
6–5
Multiple-Bus NSPOF Configuration Number 1 .................. 6–11
6–6
Multiple-Bus NSPOF Configuration Number 2 .................. 6–12
6–7
Multiple-Bus NSPOF Configuration Number 3 .................. 6–13
6–8
A Simple Zoned Configuration ...................................... 6–14
7–1
Emulated LAN Over an ATM Network ............................ 7–3
8–1
TZ88N-VA SCSI ID Switches ....................................... 8–2
8–2
Shared SCSI Buses with SBB Tape Drives ....................... 8–4
8–3
DS-TZ89N-VW SCSI ID Switches .................................. 8–6
8–4
Compaq 20/40 GB DLT Tape Drive Rear Panel .................. 8–10
8–5
Cabling a Shared SCSI Bus with a Compaq 20/40 GB DLT
Tape Drive ............................................................. 8–12
xii Contents