Filter
Top Products
Down — Downward triangle: Scrolls the menu down (which effectively
moves up the list of commands) or decreases the value being displayed.
______________________ Note _______________________
When the up or down buttons are used to increase or decrease
a numerical display, the number changes slowly at first, but
changes to fast mode if the button is held down. The maximum
number displayed is 255. An additional increment at a count of
255 resets the count to 0.
Tab/Esc — Leftward triangle: Allows you to tab through multiple optional
functions, for example, the fields in an IP address. You can use this button
to abort an entry, which takes you to the previous menu item. If pressed
repeatedly, the front panel display will turn off.
Enter — Rightward triangle: Causes the switch to accept the input you have
made and move to the next function.
6.5.1.2.2 Setting the Ethernet IP Address and Subnet Mask from the Front Panel
Before you telnet to the switch, you must connect the Ethernet cable and
then set the Ethernet IP address and subnet mask.
To use the front panel to set the Ethernet address and subnet mask, follow
these steps:
1. Press any of the switch front panel buttons to activate the display for
the top-level menu. If the Configuration Menu is not displayed, press
the down button repeatedly until it is displayed:
Select Menu:
Configuration Menu
____________________ Note _____________________
Pressing the down button selects the next lower top-level
menu. The top-level menus are:
Configuration Menu
Operation Menu
Status Menu
Test Menu
6–18 Using Fibre Channel Storage